In life and production, the use of welding positioners is becoming more and more widespread, but any product has relevant requirements before and after production. Today we will talk about the technical requirements of welding positioners. First of all, they are divided into three major categories professionally. One is rotary drive. In this aspect, we require that the speed can be adjusted extremely, and it is not fixed to rotate in one direction. This direction can be flexibly changed, that is to say, it can rotate clockwise or counterclockwise. Rotation, this speed is mainly for the case where the load is too large. For safety, the speed must be reduced accordingly. The second is tilt drive. The manufacturer of the bottle blowing machine told us that it operates at a plane angle under normal circumstances, but according to different process requirements, the angle can also be changed. However, we need to know how much the angle changes, so we need to install an angle display. Finally, there are some other technical requirements, such as leaving a certain space for welding on the port.